Find your way around quickly.
5G
Products: BT-StickerBT-Sticker MiniCRP Sticker SetGeopat unitsMobile Phone Sticker
To harmonise 5G radiation entering the flat or house from outside, Geopat Cans are used. These are placed in the outermost corners of the flat/house.
5G from electronic devices such as mobile phones is reliably harmonised with a corresponding sticker. For more details, please search for the specific application example.
Products that can also be worn directly on the body include:
> Vital Slab
> Energy Bracelet
> Insoles
> Vital Medallion (also for animals)
Action Camera
Products: BT-Sticker
A single sticker is applied to a non-obstructive spot so that all controls remain accessible.
Algae Growth
Products: Energy SphereWater Impulse Generator (Single Tap)Water Impulse Generator (House System)
Unwanted algae growth most commonly occurs in aquariums. However, there are also industrial applications where this can become a problem.
To reduce it, there are different options depending on the application:
> by means of Water Impulse Generator (House System), to obtain high-quality water from all pipes and use it in, for example, aquariums
> with the Water Impulse Generator (Single Tap), which is connected to the circulation pump to permanently energise the water
> through one or more Energy Balls, which are used as decorative elements in the aquarium
Excited Antennas
Products: CRP Sticker SetMobile Phone Sticker
Excited antennas can appear in various forms. Some antennas are immediately obvious, while others are not immediately apparent. Some objects become excited antennas because they are constantly stimulated by radiation directed at them.
Excited antennas can usually be harmonised with a single mobile phone sticker or a single CRP sticker. However, the antenna must be retested to see if a second sticker is needed elsewhere.
Examples of excited antennas include:
> Spiral staircases (mostly metal)
> Bed frames (metal, but also wood), slatted frames
> Wooden beams
> Rods (curtain, handrail, railing)
> Grids (fence, sand sieve, rod mat fence, etc.)
> Mirrors
> Bed springs
> Gutters
> Office chairs
> etc.
Car
Products: Bio-Kat CarBT-StickerCAR Engine StickerCAR USB Stick
In cars, it is important to distinguish what you want to achieve.
To harmonise electrosmog in the car, the first measure is the CAR USB Stick. This is plugged into a free USB port and remains there.
The CAR USB Stick comes with two CAR Engine Stickers. One is attached near the positive pole of the battery, the other on the air intake.
If you have a screen larger than 5" (12.7 cm) on your car's infotainment system, it should be harmonised with two BT Stickers. When attaching, ensure
> that the first sticker is applied to the top left and the second to the bottom right of the screen
> dass beide Sticker gleich angebracht werden, d. h. der Schriftzug „Pen-Yang“ zeigt bei beiden Stickern nach unten
If monitors are installed in the headrests, they must also be harmonised with two stickers each.
If, on the other hand, you want to improve exhaust emissions and harmonising electrosmog is not the main focus, a Bio-Kat Car is attached to the fuel line using Velcro.
Details on research with the Bio-Kat Car using the example of plant growth changes in a greenhouse can be found here.
Car Key
Products: BT-Sticker
Car keys with remote control require a single sticker. Please attach it so that it fits as snugly as possible.
Baby Monitor
Products: BT-Sticker
Modern baby monitors use high-frequency radio signals. For this reason, they should be harmonised with stickers.
One sticker is applied to the baby monitor and one to the counterpart, i.e., one sticker on the transmitter and one on the receiver.
Releasing Blockages
Products: Transformation Blanket
The resolution of energetic blockages can be gently supported by the regular, daily use of the Transformation Blanket, according to experience.
Further low-threshold support can be provided by
> the insoles
> the Vital Slab
> the seat cushion
when these are used daily/worn on the body.
Bluetooth
Products: BT-StickerBT-Sticker MiniCRP Sticker SetGeopat unitsMobile Phone Sticker
Bluetooth devices are easily harmonised with stickers. The corresponding sticker is attached to the device.
For devices such as in-ear headphones, each needs a sticker, so a total of two. For details, please search for the respective application (e.g., headphones, wireless mouse, etc.).
The Geopat Cans also harmonise Bluetooth but can only harmonise the load from devices from outside (outside the flat/house). The stickers are intended for electronics used in the living area or on the body.
If you want protection on the go, the energy bracelet, insoles, Vital Slab, and Vital Medallions, which are each worn on the body, are also available. For details, please search with the appropriate keyword.
Bluetooth Speaker
Products: BT-Sticker
A single sticker is applied to the device.
Blood Glucose Meter
Products: BT-Sticker
Modern blood glucose meters have larger screens and sometimes Bluetooth functions to transfer measurement results to a suitable mobile app.
For this reason, the device should be harmonised with a single sticker. The sticker should be placed where it can lie flat and not interfere with the device's functions or battery replacement.
Blood Glucose Sensor
Products: BT-Sticker Mini
Blood glucose sensors can be worn on the body for up to 14 days and determine the glucose level once per minute. This measurement can be transferred to suitable mobile apps.
These sensors require a BT Sticker Mini, which can be attached anywhere.
Glasses
Products: Energy BowlVital Pad
Glasses constructions are usually technical antennas with two types of form resonance on the body:
> a resonant circuit through the glasses themselves
> polarimeter through the glasses' arms
The glasses can be generally supported as needed by occasionally placing them in the Energy Bowl overnight or regularly on the Vital Pad.
Fractures
Products: Geopat units
Natural fractures in the earth, rock formations, and artificial fractures can have a noticeable negative radiation. Fractures also occur between kerbstones, which must be laid individually. Fractures are measurable between all these stones. The same applies to any type of paving slabs and tiles. The effects of such small fractures can be minor but are present. The Geopat Cans reliably harmonise disturbances that can emanate from fractures.
Office Work
Products: CRP Sticker SetGemstone NecklaceInsolesEnergy BraceletSeat CushionVital MedallionVital Slab
In office work as an employee in a company, fewer measures can be taken than at home, but disturbing radiation can still be comprehensively harmonised:
> wenn möglich werden an jedem Computer Monitor CRP Sticker angebracht. Details zur Anbringung unter dem Stichwort „Monitor“.
> one can wear one of the various gemstone necklaces
> one can wear one of the various Vital Medallions
> one can wear an energy bracelet
> one can use the insoles in shoes
> one can carry a Vital Slab in the left trouser pocket
> the seat cushion can also be used, which hardly attracts attention on an office chair
Controller (Game Consoles, PC)
Products: BT-Sticker
Modern game consoles have wireless controllers to play comfortably from the couch without being restricted by a limiting cable.
Each controller requires a sticker. For game consoles where the controller consists of two separate parts and can be used individually or as a single controller with a holder, each element requires a sticker.
Sloping Roof
Products: CRP Sticker Set
Influences reflected by sloping roofs are usually already harmonised when the Geopat Cans are set up.
In special cases, however, an additional balance may still need to be created. This can be the case if there is a photovoltaic or solar system on the roof and it cannot be harmonised with Bio-Kat Photovoltaic.
In diesem Fall werden zwei CRP Sticker verwendet. Einer wird oben links im Innenraum bei der Dachschräge angebracht und der andere unten rechts, wo die Dachschräge endet. Die beiden Sticker müssen dabei gleich angebracht werden, d. h. mit der Schrift „POSITIVE“ nach unten zeigend.
Digital Smoke Detectors
Products: BT-Sticker
Modern smoke detectors are often networked with each other and can be checked via a mobile app and warn as soon as one of them triggers.
This way, you also receive an alarm on your mobile phone if a smoke detector triggers that you are not constantly monitoring. This information is also helpful when you are on the go, so you can quickly deal with a possible fire or avoid it in time.
Since these smoke detectors are all radio-controlled, each individual smoke detector needs a sticker. Please do not cover any openings, as this could impair the smoke detector's ability to detect fires in time.
Digital Doorbell
Products: BT-Sticker
Modern doorbells that operate via radio and may also have a camera require a single sticker.
This can be applied to the back before installation or during a battery change. Please ensure that the battery cover on the back can still be opened.
If a separate door chime is used that is connected to the digital doorbell, it also requires a sticker.
Digital Heat Meters
Products: BT-Sticker
These are particularly found in rental flats but are also increasingly installed in private households.
A single sticker applied to the device harmonises it. If it is a rental flat and sticking is not possible, please read this question. Digital Water Meter
Many water meters are now digital, especially in rental houses. This allows suppliers to read directly without waiting for reports from homeowners.
Products: BT-Sticker
These water meters require a single sticker. Please attach it so that no buttons, switches, diodes, or other prominent parts are covered and potentially restricted in their function.
Drones
For drones, a smartphone is usually used as a control unit. The smartphone should already be equipped with a mobile phone sticker.
Products: BT-Sticker
A single sticker is applied to the drone in a non-obstructive spot. If a separate control device is used instead of a smartphone, a sticker is also applied to this remote control.
Tight Shoes
Tight shoes are left overnight in the Energy Bowl or on the Vital Pad.
Products: Energy BowlVital Pad
Printer
Printers connected to the home network via Wi-Fi need two CRP Stickers.
Products: CRP Sticker Set
Since the printer is not a flat object but often like a box, the placement of the stickers must also be modified: one sticker is applied to the top left back of the printer and the other sticker to the bottom right front.
Another description for easier understanding. The printer has a left and right side. If we stand in front of the left side, the first sticker must be applied here at the top left.
If we then stand on the right side of the printer, the second sticker must be applied here at the bottom left. If you then look at the printer from the front, the stickers are as previously described: top left back and bottom right front of the device.
It is important that both stickers are applied the same way, so the word "POSITIVE" on both stickers faces downwards.
Wichtig ist, dass beide Sticker gleich angebracht werden, also das Wort „POSITIVE“ bei beiden Aufklebern nach unten zeigt.
Attach a sticker to the frame. Ideally in a protected spot.
Products: BT-Sticker
Application example not included?
